 |
Order code: M470 |
Ordering data: Return variation |
Available for: All cam-switches of size S0 - S2 depending on the variation |
|
|
Spring return for angular displacement up to 30° can be accomplished by using the latching mechanism. If a large number
of contacts must be opened simultaneously or a total angular displacement is larger then 30° over which the spring return is operational,
the switch must use one of the spring return devices.
Return variations:
| Code |
Description |
Available for all
cam-switches of size |
| A |
return from both sides without maintained positions; 135° useable spring return angle for each side |
S0-S2 |
A for optional extra in S0
B for optional extra in S1 |
return from left without maintained positions; 135° useable spring return angle |
S0, S1 |
A for optional extra in S0
C for optional extra in S1 |
return from right without maintained positions; 135° useable spring return angle |
S0, S1 |
| D |
return from left with 135° useable angle for maintained positions; 135° useable spring return angle |
S0-S2 |
| E |
return from right with 135° useable angle for maintained positions; 135° useable spring return angle |
S0-S2 |
| F |
return from both sides with 1x30° maintained positions in between; 105° useable spring return angle for each side |
S0, S1 |
| G |
return from both sides with 1x60° or 2x30° maintained positions in between; 75° useable spring return angle for each side |
S0, S1 |
| H |
return from both sides with 1x90°, 2x45° or 3x30° maintained positions in between; 45° useable spring return angle for each side |
S0, S1 |
|
 |
| Switch size |
M [mm] for
code A, D, E, F, G, H |
M [mm] for
code B, C |
| S0 |
33.3 |
|
| S0 with front and optional extra in size S1 |
40.3 |
29.2 |
| S1 |
33.3 |
22.2 |
| S2 |
75 |
|
ATTENTION: For optional extra in size S1 shaft hole diameter 18.5 mm must be used.
|
|
