NEWS



New enclosure for KF switches "KT1.V"

A new, compact enclosure for the KF main switches is available
KT1.V Enclosure
KT1.V Enclosure
Main features:

• threaded M25 conduit entries

• IP66/67 protection degree

• with or without cover interlock

• strong durable plastic material

• integrated padlock device

• EMC complaint connection upon request


New Switch type C200-4

Kraus & Naimer extend the cam switch series with a 200A switch and switch disconnector.
C200-4
C200-4-Switch
Facts & Figures :

• ring type terminals

• Robust and oversized switch terminal lugs

• Compact design

• Max. permissible wire gage: 95mm2


New G20(S) – DC switch with knife contacts

Kraus & Naimer developed and designed a new DC-switch; the G20(S).
G20(S)
G20(S)-Switch
Main features :

• High DC switching capacity

• Compact design

• Highest contact reliability


New KF-switch series: 16-32A thermal current range

This new generation of switch disconnectors is the latest development from Kraus & Naimer
and is described as the most flexible disconnect range in their class.
KF-switch
KF-Switch
Main features :

• Rotating contact movement (instead of classical vertical lifting),
   in a new type of modular contact block

• Highly modular system allows flexibility, which for this size of switch
   has not been available on the market so far

• High mechanical life expectancy


KC-switch
KC20 base mounting
KC - New switch series with tension clamps

The new main switches of the KC-series are equipped with
tension clamps and distinguish themselves, like all Kraus & Naimer
main switches, by a compact design and at the same time with
high AC-23A switching capacity as well as very large clearance
and creeping distances.

The outstanding contact force of the tension clamps recommend the switches
for unusual conditions at shock and vibration.
This innovative connection system impresses by its simple, safe handling
and short wiring time.

Comfortable wiring of the fingerproof (IP20) terminals
is ensured by a 60º displacement of the clamps to the plane of wiring.
The switches of the KC-series are available for 7.5 - 16 kW according to AC23A,
400V, and 16-32A thermal current. The terminals are stainless and acid resistant.

KC-switch with lateral aux. cont.
KC20 with
lateral auxiliary contacts
KC-switch series

Now available with lateral auxiliary contacts

New Door Clutches with Locking Handle M800 and M810

The new door clutches with locking handle M800/M810 are complying with
all requirements of the IEC and in combination with an additional padlock device mounted
on the switch itself also with UL508A.

The new door clutches are convincing by their simple and robust design
while featuring a compact unit.
M800
Door clutch M800


M810
Door clutch M810


M800
KG160-Switch
with door clutch M800
The main features are:
  
Single hole mounting.
  
IP66/67 protection degree.
  
M800: Applicable for all cam switches of size S1 and S2 and
 
KG41B, KG64B, KG80, KG100, KG105, KG125-KG317.
  
M810: Applicable for all cam switches of size S1 and
 
KG41B, KG64B, KG80, KG100, KG105.
  
Door interlock in the OFF-Position
 
while a padlock is fitted and also in the ON- position.
  
The door can be open in the non locked OFF-position, only.
  
Override Function in the ON-position.
 
The door clutch may be opened only if the switch is in the OFF-position.
 
In special cases, however, autorizied people have a requirement to open the door,
 
even if the switch is in the ON-position.
  
Accepted Misalignment: ± 3mm horizontally, ±5mm vertically.
  
Maximum 3 padlocks with a minimum shackle diameter Ø 5 - 8 mm.