| KRAUS & NAIMER |
DKR11 - Electrical Data |
1.12.2006 |
Switch features:
- S0 (48x48mm) Front element size (can be changed by mountings and optional extras)
- Terminal screws accessible laterally (resp. from above and below for -V mountings)
- Designed for vertical wiring (resp. horizontal for -V mountings: e.g. VE-V, FS1-V)
- H-brige for high contact reliability at lower voltages
- For ring-type terminals
- Fully enclosed contact chambers provide protection from dust and other contaminants
- Finger-proof terminals (IP20)
- Contact operation by turning and/or pushing the handle
- Contacts with 35µm gold plating
Approvals:
| Approved |
Confirms to requirements |
No listing required |
| CUR, CURUS, UR |
BS EN, CH, D, FI, GOST, IEC, N, ÖVE, S, VDE |
|
BS EN...BS EN 60947 - British Standards Institution, CCC...CCC - China Compulsory Certification, CH...Schweizerischer Elektrotechnischer Verein, CSA...Canadian Standards Association, CUL...Canadian National Standards - Listed, CULUS...Canadian National and United States Standards - Listed, CUR...Canadian National Standards - Recognized, CURUS...Canadian National and United States Standards - Recognized, D...Danmarks Elektriske Materiellkontrol, FI...Sähkötarkastuskeskus, GOST...GOST - gosudarstvennyj standard, IEC...IEC 60947 - International Electrical Commission (IEC) Recommendation, N...Norges Elektriske Materiellkontroll, ÖVE...Österreichischer Verband für Elektrotechnik, RuMRS...Russian Maritime Register of Shipping, S...Svenska Elektriska Materielkontrollanstalten, UL...United States Standards - Listed, UR...United States Standards - Recognized, VDE...VDE 0660 - Verband Deutscher Elektrotechniker
AC-Values:
IEC 60947-3, EN 60947-3, VDE 0660 part 107:
| Rated Operational Voltage Ue | | 600V | 1) |
| Rated Insulation Voltage Ui | | 600V | 1) |
| Rated Thermal Current Iu/Ith | | 6A | 2) |
| Rated Operational Current Ie |
| AC-21A Switching of resistive loads, including moderate overloads |
|
|
For switching of power <1kW 1V | | 6A | 2) |
|
|
For switching of power <1kW 6V | | 3A | 2) |
|
|
For switching of power <1kW 12V | | 2A | 2) |
|
|
For switching of power <1kW 24 V | | 1A | 2) |
|
|
For switching of power <1kW 48V | | 0.8A | 2) |
|
|
For switching of power <1kW 60V | | 0.7A | 2) |
|
|
For switching of power <1kW 110V | | 0.4A | 2) |
|
|
For switching of power <1kW 220V | | 0.2A | 2) |
|
|
For switching of power <1kW 230V | | 0.2A | 2) |
|
|
For switching of power <1kW 240V | | 0.18A | 2) |
|
|
For switching of power <1kW 380V | | 0.13A | 2) |
|
|
For switching of power <1kW 400V | | 0.13A | 2) |
|
|
For switching of power <1kW 440V | | 0.1A | 2) |
|
|
For switching of power <1kW 500V | | 0.09A | 2) |
|
|
For switching of power <1kW 550V | | 0.08A | 2) |
|
|
For switching of power <1kW 600V | | 0.05A | 2) |
1)...IEC 60947-3, EN 60947-3, VDE 0660 part 107 - Valid for lines with grounded common neutral termination, overvoltage category
III, Other values on request.
2)...IEC 60947-3, EN 60947-3, VDE 0660 part 107
UL/Canada:
| Rated Voltage | | 600V | 1) |
| Rated Insulation Voltage Ui | | 600V | 1) |
| Rated Thermal Current | | 6A | 1) |
| Rated Operational Current Ie |
| AC-21A Switching of resistive loads, including moderate overloads |
|
|
For switching of power <1kW 1V | | 6A | 1) |
|
|
For switching of power <1kW 6V | | 3A | 1) |
|
|
For switching of power <1kW 12V | | 2A | 1) |
|
|
For switching of power <1kW 24 V | | 1A | 1) |
|
|
For switching of power <1kW 48V | | 0.8A | 1) |
|
|
For switching of power <1kW 60V | | 0.7A | 1) |
|
|
For switching of power <1kW 110V | | 0.4A | 1) |
|
|
For switching of power <1kW 220V | | 0.2A | 1) |
|
|
For switching of power <1kW 230V | | 0.2A | 1) |
|
|
For switching of power <1kW 240V | | 0.18A | 1) |
|
|
For switching of power <1kW 380V | | 0.13A | 1) |
|
|
For switching of power <1kW 400V | | 0.13A | 1) |
|
|
For switching of power <1kW 440V | | 0.1A | 1) |
|
|
For switching of power <1kW 500V | | 0.09A | 1) |
|
|
For switching of power <1kW 550V | | 0.08A | 1) |
|
|
For switching of power <1kW 600V | | 0.05A | 1) |
1)...UL/Canada - Refer to International Standards and Approvals
DC-Values:
Resistive loads (T<=1ms)
| Number of series contact(s) |
DC-switching capacity |
| 1 |
2 |
3 |
4 |
5 |
6 |
8 |
| 600V
|
|
|
|
|
|
|
0.02A |
| 550V
|
|
|
|
|
|
|
0.03A |
| 500V
|
|
|
|
|
|
|
0.04A |
| 440V
|
|
|
|
|
|
|
0.05A |
| 400V
|
|
|
|
|
|
|
0.06A |
| 380V
|
|
|
|
|
|
|
0.06A |
| 240V
|
|
|
|
|
|
|
0.08A |
| 220V
|
|
|
|
|
|
|
0.1A |
| 230V
|
|
|
|
|
|
|
0.1A |
| 110V
|
|
|
|
|
|
|
0.2A |
| 60V
|
|
|
|
|
|
|
0.27A |
| 48V
|
|
|
|
|
|
|
0.3A |
| 24V
|
|
|
|
|
|
|
0.8A |
| 12V
|
|
|
|
|
|
|
1.5A |
| 6V
|
|
|
|
|
|
|
2.5A |
| 1V
|
|
|
|
|
|
|
4A |
General:
| Minimum Voltage | | on request | |
| Short Circuit Protection |
| Max. fuse size (G-fuse, quick) | | 6A | |
| Rated short-time withstand current (1s-current) | | 40A | |
| Ambient Temperature of Stages (for switches with electro-mechanical accessories refer to optional extra) |
| open at 100% Iu/Ith | | 55°C during 24 hours with peaks up to 60°C | |
| enclosed at 100% Ithe | | 35°C during 24 hours with peaks up to 40°C | |
| Storage temperature | | -40°C to 85°C (in case of temperature below -5°C no shock load permissible) | |
| Terminal lead material | | copper wires only | |
| For connections with insulated ring and fork type cable terminal |
| Inner diameter | | >= 3.2mm | |
| Outside diameter | | <= 7.4mm | |